3 In 1 Multi Parameter Water Quality Tester Benchtop PH / Conductivity / DO Meter

The PCD100 is a benchtop multi-parameter water quality meter for measuring pH, conductivity, TDS, resistivity, salinity, dissolved oxygen and temperature. It features a high-resolution LCD display, automatic calibration, automatic temperature compensation, stable reading indication and storage for up to 450 groups of results. The IP54-rated enclosure is suitable for routine laboratory water analysis.

The PCD100 Benchtop pH/Conductivity/DO Meter combines several essential water quality measurements in one compact laboratory instrument.

• pH range: -2.00 to 20.00 pH with accuracy of ±0.01 pH ±1 digit
• Supports one- to three-point pH calibration with automatic recognition of standard buffer solutions
• Electrode self-diagnosis capability
• Conductivity range: 0 to 200.0 mS/cm with automatic range selection
• Accuracy: ±1.0% FS ±1 digit for conductivity measurements
• Provides TDS, resistivity and salinity measurements
• Dissolved oxygen measurement: 0 to 20.00 mg/L or 0 to 200.0% saturation
• Polarographic DO probe supports 100% oxygen or zero-oxygen calibration
• Automatic barometric pressure compensation and manual salinity compensation
• Built-in microprocessor for automatic calibration and parameter setup
• Stable reading display and storage for up to 450 groups of results
• Measurement data transfer to USB flash drive
• Wireless connection to optional printer

The standard kit includes an ATC pH probe, plastic ATC conductivity probe, polarographic dissolved oxygen probe, calibration solutions, replacement DO sensor caps, probe holder and power adapter.

The enclosure is rated IP54 for protection against dust and accidental splashes. It should not be submerged in water.

• Drinking water and purified water testing
• Surface water and groundwater analysis
• Wastewater treatment laboratories
• Environmental water quality monitoring
• Aquaculture and fisheries
• Food and beverage quality control
• Industrial process water testing
• Educational and research laboratories
• Routine pH, conductivity and dissolved oxygen measurement

• PCD100 Meter
• 201T ATC pH probe
• pH buffer solution: pH4.00/7.00/10.01, 50mL, one for each
• CON201T Plastic ATC Cond probe, K=1.0
• Standard Cond solution: 50mL: 84μS/1413μS/12.88mS/cm, one for each
• DO01-2M Polarographic DO probe, cable length: 2m
• DOS-01 Membrane refill solution: 30mL, 1pc
• DOSC Sensor caps: 3pcs/group, 1pkg
• F01 Flexible probe Holder: 1pc
• A01 Power adaptor: 1pc